Total: $0.00
Total: $0.00
Sale!

Tremflex 834 Bucket: Acrylic Latex 5 Gallon

Original price was: $199.44.Current price is: $142.18.

71 in stock

SKU: 544857 Categories: , , , ,

Description

Tremflex 834 Bucket: Acrylic Latex 5 Gallon

Tremflex 834 bucket is a pure acrylic latex sealant formulated to provide a fastsetting pliable seal with minimal shrinkage. Questions? Contact Us.

Tremflex 834 bucket can be used for general purpose interior and exterior caulking and as a back-bedding glazing compound. It is also highly recommended as an acoustical seal in the construction of interior walls, ceilings and floors. It is suitable for use on vinyl, aluminum and wood siding as well as on bathroom and kitchen fixtures.

Limitations:
• Do not apply Tremflex 834 to damp or contaminated surfaces.
• Always utilize the sealant’s MSDS found on our website at www.tremcosealants.com for information on proper ventilation, Personal
Protective Equipment (PPE) and other health concerns.
• Keep product from freezing.
• Although Tremflex 834 is paintable, this does not imply adhesion to and compatibility with all paints. Please refer to Tremco Technical Bulletin No.S-09-05 for more information.

Substrate Preparation:
Surfaces must be sound, clean, and dry. All release agents, existing waterproofing, dust, loose mortar, laitance, paints, or other finishes must be removed. This can be accomplished with a thorough wire brushing, grinding, sandblasting, or solvent washing, depending on the contamination. Tremco recommends that surface temperatures be 40 °F (5 °C) or above at the time the sealant is applied. Sealant must be applied in temperatures above 40 °F

Finish your job with Tremco:

Tremflex 834 Tube

Tremgrip Tube

Tremsil 200 Tube

• Tremflex 834 meets or exceeds the requirements of the following

specifications:
• ASTM C834, Type OP, Grade -18 °C
• CAN/CGSB 19-GP-17M

Application:
Apply Tremflex 834 with conventional caulking equipment filling the joint from the bottom first. Immediately tool the sealant with a spatula to ensure intimate contact with the joint walls. Dry tooling is preferred, although water can be used in limited amounts to slick the spatula if needed. For window and door perimeter fillet bead applications, a 1/4″ (6 mm) minimum surface area is recommended.

Tremco

Warning: This product contains chemical(s) known to the State of California to cause cancer and/or to cause birth defects or other reproductive harm.